Fret Beam is TOTALLY free through Cyber Monday! Sign up by November 30 and it's free forever.Get Fret Beam free

← Back to Help center

Editing a tab

Tab editing is part of the Basic and Pro packages. With it you can fix any tab in Fret Beam: one you recorded (on Pro), one you imported, or one you built by voice. Fix it by hand in the Edit view, or say or type the change. This covers both, plus where the tab goes when you save it.

Quick fixes on the Control screen

  • CLEAN UP tidies the rhythm of the current lick. It straightens the timing and keeps your triplets. UNDO brings back the last version.
  • SHIFT POSITION moves the lick to another spot on the neck, same notes. Press it again to keep cycling.
  • Neck Zone is a card on the Control screen. Pick the box you will play in before you record, and the tab lands right there. That saves you a Shift Position later.
  • CLEAR TAB wipes the tab so you can start over.

Fix it by voice or by typing

Hold down HOLD TO TALK and say the change, or type it in the TYPE IT INSTEAD box. For example:

  • "replace the last four notes with five D, seven G, five D, seven D"
  • "undo that"
  • "copy bar one onto bar three"
  • "five D and seven G together"
  • "make the last note a power chord"

See Voice + AI for everything you can ask for.

The Edit view

Open the Edit tab at the top of the app. The heading reads "Edit — click a note, then fix it".

Picking notes

  • Click a note to select it.
  • Click and drag across the tab to select a run of notes. Shift-click also extends the selection.

Seeing and hearing the tab

  • Zoom: the − and + buttons make the tab smaller or bigger.
  • Resize: drag the bar under the tab to make the tab window taller or shorter. The zoom and size are remembered.
  • ▶ PLAY plays the tab back with a basic MIDI guitar sound at the click's tempo, so you can hear what you wrote. It comes out of your computer's speakers, not OBS. Press ■ STOP to stop it.

Changing a note

  • FRET − / + moves the note up or down a fret.
  • STRING ▲ same note / ▼ same note moves it to the next string, keeping the same pitch.
  • SLIDE, HAMMER/PULL, TIE, BEND ½ and BEND FULL add a technique.
  • PICK: ⊓ DOWN, V UP or ALTERNATE adds pick strokes. Press the same one again to remove it. Pick strokes show on screen and in the Guitar Pro files and pictures you save.
  • LENGTH: Whole, Half, Quarter, Eighth, 16th or 32nd, plus TRIPLET and DOT.
  • + ADD NOTE AFTER adds a note, and DELETE removes the selected one.

Chords and double-stops

Click + ADD NOTE TO CHORD, then tap the neck to add a note on top of the selected one. Each extra note shows as a chip, like "7 on G ✕". Click the ✕ to remove that note. Shift Position and moves carry the whole chord.

Rests

  • MAKE IT A REST turns the selected note into a rest.
  • REST AFTER (or REST BEFORE) with a length puts a rest in the selected note's own space, so the notes after it don't move. Add DOTTED if you want it. NO REST takes the rest out.

Copy and paste

  • COPY and PASTE copy the highlighted notes. Click where they go, then paste.
  • COPY BAR and PASTE BAR copy a whole bar.

Charts

The Edit view works on chord charts too. Tap a fret on the grid to move a dot, use MUTE or OPEN under each string, and tap a dot to pick a finger 1 to 4, or PLAIN to remove it. For a progression, use CHORD SHAPES to change a chord's grip everywhere it shows up, or tap a bar under BARS to change which chord that bar plays.

Saving your tab

Press SAVE on the Control screen, on Basic or Pro. It keeps the tab in your Library and writes a Guitar Pro file (.gp) and a picture (PNG) to Documents → Guitar Tabs. A footswitch on CC 29 does the same.

In the Library, Export ▾ puts a picture or a Guitar Pro copy on your Desktop. Deleting a saved tab from the Library leaves its files in Guitar Tabs.

To add a finished tab to a video, see Add Tab to Video.

Still stuck?

Send us a message and a real person will get back to you, usually within one business day.

Contact us