Fret Beam is TOTALLY free through Cyber Monday! Sign up by November 30 and it's free forever.Get Fret Beam free

← Back to Help center

Add Tab to Video

Add Tab to Video puts a moving tab in your videos. The tab scrolls under a playhead in time with the click, so the notes on screen line up with the notes you play. There are two ways to do it, and both come with the Pro package.

  • Live, while you record. Press PLAY ALONG, play the lick with the scroll, and the video you are recording has the moving tab in it from the first beat.
  • After the fact. Already shot the video? Press ADD TAB TO VIDEO… on the lick's row in the Library, pick the video, and Fret Beam makes a copy with the scrolling tab added.

Everything here runs on your computer. Your takes and videos never leave it.

Want to watch the whole thing first? See the full video guide, How to add scrolling guitar tab to a video.

Before you start

You need a tab on screen or in your Library. It can be a lick you recorded, a tab you imported, or one you built by voice or by typing. Clean it up first if you want. See Editing a tab and Importing a tab.

The tab scrolls at the click's current tempo. For a slower scroll, turn the tempo down before you press PLAY ALONG.

Live, while you record

  1. Put the tab on screen. Load it from the Library, or record it fresh. You can also press ▶ PLAY ALONG on the lick's row in the Library to start it for that lick.
  2. Press PLAY ALONG. It is on the main screen and on the Remote. A footswitch button set to CC 31 does the same thing. Press it once to start, press it again to stop.
  3. Wait for the count-in. You get 1, 2 or 4 bars of click. Pick how many in Settings, in the Add Tab to Video panel.
  4. Play along with the scroll. The tab moves under the playhead in time with the click.

The scroll shows up everywhere the tab does: the wide tab window in OBS, the vertical window, and the app's own vertical clip recordings. Record the way you normally record and the moving tab is in the video. If the tab is not in your OBS scene yet, set that up first: Setting up the tab in OBS.

If you press PLAY ALONG while a chord chart is on screen, the app asks you to show a tab first. Play Along scrolls tabs, not charts.

Options for the live way

  • Show tab. The Show tab switch is under PLAY ALONG. Turn it off for a clean video: the tab stays hidden, appears for the count-in and the scroll, and disappears again when the lick ends. Switch it on again to see your tab.
  • Loop a section. Under PLAY ALONG, choose All bars or Pick bars, set From bar and to bar, and pick Repeat 2×, 4×, 8× or until stopped.
  • The playhead. In Settings, choose the playhead color (Amber, White, Red, Green or Blue), where it sits (Left, Near left or Middle), and what it highlights (Off, The note being played, or The whole bar).
  • Record a vertical clip with every Play Along. Switch this on in the Add Tab to Video panel in Settings and the vertical clip starts with the count-in and stops after the last note. Vertical clip recording has to be turned on for this to work.

After the fact, on a video you already shot

This works best when you played the lick to the app's click while you filmed.

  1. Open the Library and find the lick.
  2. Press ADD TAB TO VIDEO… on the lick's row. The Add Tab to Video panel opens.
  3. Press PICK A VIDEO… and choose your video.
  4. Let the app line it up.
    • A lick you recorded is found in the video by its sound. The app tells you where: "Found your take at …".
    • Any other lick (imported, typed or built by voice): if a steady click is in the video's sound, the tab is placed on the first downbeat where your playing comes in, at the click's tempo. Drag the bar 1 marker if it should start somewhere else. If there is no click, drag to beat 1 of the first bar, and the tab runs at the BPM you set there.
  5. Check the stills. The app shows stills from your video with the tab laid over them so you can see that the first note lands where it should. If it comes in early or late, move it with the buttons, by a bar, a beat, or a tenth of a second.
  6. Choose where the tab goes. Top, Middle or Bottom. Or choose In my Fret Beam panel if your video already shows a Fret Beam window, and draw a box over that window in the picture.
  7. Choose how much of the video. Just the lick keeps a few seconds either side of the lick. Whole video keeps everything and takes longer on a long video.
  8. Press MAKE THE VIDEO. The finished file is saved in your clips folder as "your lick's name + tab.mp4". Your original video is not changed. Press SHOW IN FINDER on a Mac or SHOW IN FOLDER on Windows to see it.

Your clips folder is Movies → Fret Beam Clips on a Mac and Videos → Fret Beam Clips on Windows, unless you picked a different folder for vertical clips in Settings.

If the app cannot find the take

If the click was not in the recording, or the sound is too quiet, the app says "We couldn't find this take in the video." Drag to where the lick starts, check the stills, and move it until the first note lands. Then make the video as usual.

Video files

  • MP4 and MOV files open on Mac and Windows.
  • OBS records to MKV by default. On Windows the app reads an MKV directly.
  • On a Mac, the app can't open an MKV. In OBS, choose File → Remux Recordings to make an MP4 copy, then pick that copy.

What gets saved on your computer

When you record a lick, the app keeps the sound of that take with the lick, so it can find the take in a video you pick later. It stays on your computer.

If the button is locked

Add Tab to Video comes with the Pro package. On Basic the button shows a short note and a link to move up. Your membership key stays the same, and the feature turns on after you quit and reopen the app.

Still stuck?

Send us a message and a real person will get back to you, usually within one business day.

Contact us